8
To remove the blades: insert the blade
driver diagonally into the bottom of the
blade with downward pressure.
7.2 Propellers
Installation: As shown above, connect each propeller to its corresponding motor
shaft, either position "A/B", then lock the propeller to the motor shaft.
HEAD
Find the corresponding type of blades
(A to A, B to B), and press the blades
vertically to the motor shaft until the
blades are pressed to the level of the
protection rings.
Note:
When replacing the blades, it is necessary to avoid the blades being
deformed by external forces. The deformed blades will affect the flight stability
of the drone.
