background image

Remove Packaging

Your champagne cellar has been packed for shipment with all 
parts that could be damaged by movement securely fastened.  
Before using, be sure all packing materials and tape have 
been removed.

Important

Keep your carton packaging until your champagne cellar has 
been thoroughly inspected and found to be in good condi-
tion.  If there is damage, the packaging will be needed as 
proof of damage in transit.

Note to Customer

This merchandise was carefully packed and thoroughly 
inspected before leaving our plant.  Responsibility for its safe 
delivery was assumed by the retailer upon acceptance of the 
shipment.  Claims for loss or damage sustained in transit 
must be made on the retailer as follows:
 

Exterior and Concealed Damage 

• 
Any damage must be reported immediately to your retailer.

DO NOT RETURN DAMAGED MERCHANDISE TO THE 
MANUFACTURER - FILE THE CLAIM WITH THE RETAILER.

IT IS IMPORTANT THAT YOU SEND 
IN YOUR WARRANTY RECORD CARD 
IMMEDIATELY AFTER TAKING DELIVERY 
OF YOUR CHAMPAGNE CELLAR.

REMINDER

UNPACKING YOUR WINE CELLAR

1

Undercounter 30SWCCE Champagne Cellar

 Specifications

Exterior Cabinet Dimensions 
WxHxD (in.)

14 7/8 x 34 1/4 x 23 5/8

Weight

128 lbs.

Capacity

15 Bottles

Temperature

40-65 

°

F

Power Supply 
supplied with a 15 amp plug

115VAC/60Hz

Summary of Contents for Refrigerated Champagne Cellar 3SWCCE











Reviews: