5
INSTALLING YOUR APPLIANCE
Figure 5
Toe kick screw
Toe kick ( Front Grille)
Figure 6
Grounding Method
This product is factory equipped with a power supply
cord that has a three-pronged, grounded plug. It must be
plugged into a mating grounding type receptacle in accor
-
dance with the National Electrical Code and applicable lo
-
cal codes and ordinances (see Figure 6). If the circuit does
not have a grounding type receptacle, it is the responsibility
and obligation of the customer to provide the proper power
supply.
Electrical Requirements
Electrical Requirements: A 115 volt, 15 amp dedicated cir
-
cuit is required. A 3 prong grounded receptacle is required.
The unit must be installed according to your local building
codes and ordinances.
Electrical Shock Hazard
• Do not use an extension cord with this appliance.
They can be hazardous and cause deficient opera
-
tion.
• This unit should not, under any circumstances, be
installed to an un-grounded electrical supply.
• Do not remove the grounding prong from the power
cord. See Figure 3.
• Do not use an adapter. See Figure 4.
• Do not splash or spray water from a hose on the
appliance. Doing so may cause an electrical shock,
which may result in severe injury or death.
!
WARNING
Figure 4
NOTE
Ground Fault Circuit Interrupters (GFCI) are prone to nui
-
sance tripping which will cause the appliance to shut down.
GFCI’s are generally not used on circuits with power equip
-
ment that must run unattended for long periods of time, un
-
less required to meet local building codes and ordinances.
Do not remove
ground prong
Figure 3
