Marvel MS24FASFRW Installation, Operation And Maintenance Instructions Download Page 2

UNPACKING YOUR APPLIANCE

Remove Packaging

Your refrigerator has been packed for shipment with all parts that 

could be damaged by movement securely fastened.  Before using, 

be sure all packing materials and tape have been removed.

Important

Keep your carton packaging until your refrigerator has been 

thoroughly inspected and found to be in good condition.  If there 

is damage, the packaging will be needed as proof of damage in 

transit.

Note to Customer

This merchandise was carefully packed and thoroughly inspected 

before leaving our plant.  Responsibility for its safe delivery was 

assumed by the carrier upon acceptance of the shipment.  Claims 

for loss or damage sustained in transit must be made on the car

-

rier as follows:

 

• 

Exterior Damage: Make thorough damage notation on your 

delivery receipt and have driver acknowledge by signature 

and date. Send a written request asking for an inspection 

report from carrier. Include the name of the carrier repre

-

sentative and the date the inspection was requested. Retain 

inspection report and receipt for filing of a claim. 

• 

Concealed Damage: This must be reported to carrier within 

fifteen days. Obtain inspection report from carrier. Retain the 

inspection report for filing of the claim. 

DO NOT RETURN DAMAGED MERCHANDISE TO THE MANUFAC

-

TURER - FILE THE CLAIM WITH THE CARRIER.

MARVEL COMMERCIAL

1

Summary of Contents for MS24FASFRW













Reviews: