4
4. Never try to open the scale apart or modify it in any way. High-voltage
components inside the scale create the danger of fire and electric shock.
1.3 Power plug and AC outlet
1. Use only a proper AC electronic outlet: 190V ~ 250V; Temperature: -10°C~
+40°C; Humidity: 40%~90%. Use beyond the indicated conditions creates the
danger of malfunction, fire and electric shock.
2. Make sure the power plug is inserted as far as it will go. Loose plugs create
the danger of electric shock, overheating and fire.
Note: Do not use an already damaged plug. Never connect to power outlet
that is loose.
3. Use a dry cloth to periodically wipe off any dust built up on the head of the
plug. Humidity can cause poor insulation and create the danger of electric
shock and fire if dust stays on it.
4. Do not allow the power outlet or plug to become damaged, and never try to
modify them in any way. Continued use of a damaged power outlet can cause
deterioration of the insulation, exposure of internal wiring, and the danger of
short circuit, electric shock and even fire.
1.4 Caution
During handling electronic label printing scale
1. Do not place the scale on an unstable or uneven surface. Doing so can cause
the scale to fall, and create the danger of malfunction, fire, and electric shock.
2. Do not place the scale in the following areas.
•
Areas where the scale will be subject to large amounts of humidity or dust,
or directly exposed to extreme hot or cold air.
•
Areas exposed to direct sunlight, in a close electronic motor, or any other
area subject to very high temperature.
3. Do not overlay bend the power cord, do not allow it to be caught between
desks or other furniture, and never place heavy objects on top of the power
cord. Doing so can cause short circuit or damage of the power cord, creating
the danger of fire and electric shock.
4. Be sure to grasp the plug when unplugging the power cord from the wall
outlet. Pulling on the cord can damage it, break the wiring, or cause short-
circuit, creating the danger of fire and electric shock.
5. Never touch the plug while your hands are wet. Doing so creates the danger
of electric shock.
6. Do not place electric object near the scale. Any electric object getting into the
scale maybe creates the danger of malfunction.
7.
Make sure there is no sharp electric magnetic field around the scale;
otherwise it will cause a danger of capability reduction of scale.