NOTICE
Do not place cans or bottles in the ice
compartment because they will freeze.
To turn off ice production:
Raise the bin arm into an
upright and locked position. The unit will preserve
temperature for ice storage.
NOTICE
If not intending to use the ice maker, turn the water
supply valve off. It is also important to raise the bin arm
of the ice maker (see above). Failure to raise the bin arm
may result in damage to the water valve.
Certain sounds are normal during the unit’s operation. You
may hear the compressor or fan motor, the water valve, or
ice dropping into the ice bucket.
!
CAUTION
NEVER use an ice pick, knife or other sharp instrument
to separate cubes. Shake the ice bucket instead.
During periods of limited use or high ambient temperatures, it
is common for cubes to fuse together. Gently shake the
bucket to break apart cubes. If not using the ice maker
regularly, empty the ice bucket periodically to ensure fresh
cubes.
It is normal for cubes to appear cloudy. The cause is air
trapped in the water because of fast freezing. It is not caused
by the health, taste or chemical make up of the water. It is the
same air that is in every glass of water you drink.
Remove the ice bucket for emptying and cleaning. To
remove the ice bucket, raise the bin arm and remove the
bucket from the ice compartment. Use the ice bucket for ice
storage only.
OFF
ON
First Use
All controls are preset at the factory. Initial startup
requires no adjustments.
NOTICE
Marvel
recommends discarding the ice produced
during the first two to three hours of operation to avoid
possible dirt or scale that may dislodge from the water
line.
To turn the unit on or off:
Press the rocker switch located inside the door on the front
panel, or behind the grille.
Ice
ICE MAKER OPERATION
When the ice bucket is full, the ice making mechanism will
shut off. However, the refrigeration system will continue to
cool and maintain the ice supply.
OFF
ON
Installation Operation and Maintenance Instructions
14
