14
Magnetic Gasket
remove starting at a
corner, grasp and pull
away from the door.
Step 3: Cut and drill the overlay panel
Depending on your model cut the overlay door panel to the
dimensions shown in Figures 14 and 15 for a left hand door
model or Figures 16 and 17 for a right hand door model.
Overlay panel
flush with top
of door.
Holes in
gasket
retainer.
Overlay panel to
be centered on
width of door.
Figure 16
Figure 16a
Step 2: Remove the door gasket
With the door laying on a flat surface and starting at a
corner of the door, remove the magnetic door gasket from
the interior side of the door, see Figure 16. Set the gasket
aside on a flat surface.
There are 10 holes in the gasket retainer extrusions, (3 on
each side and 2 at the top and bottom which are used to
fasten the panel to the front of the door. The screws are
provided in the literature pack.
OVERLAY DOOR PANEL INSTALLATION
