Marvel 60RD Installation, Operation & Maintenance Instructions Manual Download Page 2

Remove Packaging

Your drawer refrigerator has been packed for ship-
ment with all parts that could be damaged by
movement securely fastened. Before installing the
drawer refrigerator, be sure all packing materials
and tape have been removed.

Important

Save the carton packaging until your drawer
refrigerator has been thoroughly inspected and
found to be in good condition. If there is damage,
the packaging will be needed as proof of damage
sustained in transit.

Note to Customer

This unit was carefully packed and thoroughly
inspected before leaving our plant. Responsibility
for its safe delivery was assumed by the carrier
upon acceptance of the shipment. As directed on
the side of the packaging carton, claims for loss or
damage sustained in transit must be made on the
carrier as follows:

Exterior Damage

Make a thorough damage notation on the delivery
receipt and have the driver acknowledge by sign-
ing and dating. Send a written request asking for
an inspection report from the carrier representa-
tive and the date the inspection was requested.
Retain the inspection report and receipt for filing of
a claim.

Concealed Damage 

This must be reported to the carrier within fifteen
days. Obtain an inspection report from the carrier.
Retain the inspection report for filing of the claim.
DO NOT RETURN DAMAGED MERCHANDISE
TO THE MANUFACTURER - FILE THE CLAIM
WITH THE CARRIER.

STARTING OUT

2

Summary of Contents for 60RD













Reviews: