13
E
D
+
OIL
OIL
50:1
DOLMAR
Combustible
1000 cm
3
(1 litro)
20 cm
3
20 cm
3
5000 cm
3
(5 litros)
100 cm
3
100 cm
3
10000 cm
3
(10 litros)
200 cm
3
200 cm
3
50:1
50:1
aceite
MARUYAMA
Otro aceite
1.0 Us-gal. (3.7 l)
2.6 floz. (75 cm
3
)
2.5 Us-gal. (9.4 l)
6.4 floz. (189 cm
3
)
5.0 Us-gal. (18.9 l)
12.8 floz. (378 cm
3
)
Chain Oil
Use an oil with adhesive additive for lubricating the chain and
guide bar. The adhesive additive prevents the oil from being
flung off the chain too quickly.
MARUYAMA FORMULA FORCE Bar & Chain Oil is
available in the following sizes:
32 oz. order number #841039
1 gal.
order number #841040
Fuel
CAUTION:
This saw is powered by mineral-oil products (gasoline and
oil).
Be especially careful when handling gasoline .
Do not smoke. Keep tool well away from open flames, spark,
or fire (explosion hazard).
Fuel mixture
This tool is powered by a high-performance air-cooled two-stroke
engine. It runs on a mixture of gasoline and two-stroke engine
oil.
The engine is designed for unleaded regular gasoline with a
min. octane value of 91 ROZ. In case no such fuel is available,
you can use fuel with a higher octane value. This will not affect
the engine.
In order to obtain an optimum engine output and to protect
your health and the environment use unleaded fuel only.
To lubricate the engine, use a synthetic oil for two-stroke air-
cooled engines (quality grade JASO FC or ISO EGD), which
has to be added to the fuel. The engine has been designed for
use of MARUYAMA high-performance two-stroke engine oil and
a mixture ratio of only 50:1 to protect the environment. In addi-
tion, a long service life and reliable operation with a minimum
emission of exhaust gases are ensured.
MARUYAMA high-performance two-stroke engine oil is avail-
able in the following sizes to suit your individual requirements:
In case MARUYAMA high-performance two-stroke engine oil is
not available, it is urgently recommended to use a mixture ratio
of 50:1 with other two-stroke engine oils, as otherwise optimum
operation of the engine cannot be guaranteed.
Caution: Do not use ready-mixed fuel from petrol
stations.
The correct mixture ratio:
50:1 when using MARUYAMA high-performance two-stroke
engine oil, i. e. mix 50 parts gasoline with 1 part oil.
50:1 when using other synthetic two-stroke engine oils
(quality grade JASO FC or ISO EGD), i. e. mix 50 parts
gasoline with 1 part oil.
NOTE:
For preparing the fuel‑oil mixture first mix the entire oil quantity
with half of the fuel required, then add the remaining fuel. Thor-
oughly shake the mixture before filling it into the chain saw tank.
It is not wise to add more engine oil than specified
to ensure safe operation. This will only result in a
higher production of combus-tion residues which
will pollute the environment and clog the exhaust
channel in the cylinder as well as the muffler. In
addition, fuel consumption will rise and perform-
ance will decrease.
The Storage of Fuel
Fuels have a limited storage life. Fuel and fuel mixtures
age through evaporation, especially at high tempera-
tures. Aged fuel and fuel mixtures can cause starting
problems and damage the engine.Purchase only that
amount of fuel, which will be consumed over the next
few months. At high temperatures, once fuel has been
mixed it should be used up in 6-8 weeks.
Store fuel only in proper containers, in dry, cool,
secure locations!
AVOID SKIN AND EYE CONTACT
Mineral oil products degrease your skin. If your skin
comes in contact with these substances repeatedly
and for an extended period of time, it will desiccate.
Various skin deseases may result. In addition, allergic
reactions are known to occur.
Eyes can be irritated by contact with oil. If oil comes into
your eyes, immediately wash them with clear water.
If your eyes are still irritated, see a doctor
immediately!
1 l order number 980 008 107
100 ml order number 980 008 106
