manualshive.com logo in svg

Maruyama BSM300, Instruction Manual, Page: 13 / 36

Share
Download
Maruyama BSM300 Instruction Manual Download Page 13

   

 

   

 

12

6.

 

Explanation of each portion 

 

■

STAND 

 

Stand is used when you attach and detach boom sprayer with tractor. 

WARNING 

 

HOW TO SET STAND 

①

Please lift up lower link by shift lever then confirm stand is not contacting on 
ground. 

②

Pull out the snap pin and pull out stand pin while holding stand by hand. 

③

After unfold the stand to the end insert stand pin indicated in sketch and install 

snap pin. 

④

Move the stand back and forth to confirm whether it is surely locked. 

 

 

 
 
 
 
 
 
 
 
 
  HOW TO FOLD STAND 

①

 

Please lift up lower link by shift lever then confirm stand is not contacting on

 

ground. 

②

 

Remove snap pin, and pull out stand pin while holding stand by hand. 

③

 

Fold stand and insert stand pin indicated in sketch then install snap pin. 

④

 

Move the stand up and down to confirm whether it is surely locked. 

 
 
 
 
 
 
 

Snap pi

ｎ

  to be inserted.   

Pin to be inserted.   

●

When you unfold the stand, hold the stand by hand then pull out the pin and Unfold 
it. 

Stand. 

Stand pin.   

Summary of Contents for BSM300





































Reviews:

No comments