manualshive.com logo in svg

MARUTI SUZUKI Wagon R, Manual

The Maruti Suzuki Wagon R user manual is essential for any Wagon R owner. Easily accessible and free to download from manualshive.com, this comprehensive manual provides detailed instructions, troubleshooting tips, and valuable insights to maximize the driving experience. Get your hands on this must-have manual today!

Share
Download
background image

Table of Contents 2- i

2

Section 2

CONTENTS

Suspension

Precautions ................................................. 2-*

Precautions.............................................................. 2-*

Precautions on Suspension ................................... 2-*

Suspension General Diagnosis...............2A-*

Diagnostic Information and Procedures............ 2A-*

Suspension, Wheels and Tires Symptom 

Diagnosis ...........................................................2A-*

Repair Instructions .............................................. 2A-*

Suspension System Inspection ............................2A-*

Front Suspension .....................................2B-*

General Description ............................................. 2B-*

Front Suspension Description ..............................2B-*
Front Wheel Alignment Construction ...................2B-*

Repair Instructions .............................................. 2B-*

Front Wheel Alignment Inspection and 

Adjustment .........................................................2B-*

Front Strut Assembly Components ......................2B-*
Front Strut Assembly Removal and 

Installation..........................................................2B-*

Front Strut Assembly Disassembly and 

Reassembly .......................................................2B-*

Front Strut Inspection...........................................2B-*
Coil Spring, Strut Bearing and Strut Support 

Check.................................................................2B-*

Suspension Arm Components .............................2B-*
Suspension Arm Removal and Installation ..........2B-*
Suspension Arm Check .......................................2B-*
Suspension Arm Front Bush Removal and 

Installation..........................................................2B-*

Suspension Arm Joint Dust Cover Removal 

and Installation...................................................2B-*

Front Suspension Frame Components ................2B-*
Front Suspension Frame Removal and 

Installation..........................................................2B-*

Front Suspension Frame Check ..........................2B-*

Specifications....................................................... 2B-*

Tightening Torque Specifications.........................2B-*

Special Tools and Equipment ............................. 2B-*

Special Tool .........................................................2B-*

Rear Suspension ..................................... 2C-1

General Description ............................................. 2C-*

Rear Suspension Description.............................. 2C-*

Repair Instructions ..............................................2C-1

Rear Wheel Alignment Inspection....................... 2C-*
Rear Suspension Components ........................... 2C-*
Rear Shock Absorber Removal and 

Installation ......................................................... 2C-*

Rear Shock Absorber Inspection ........................ 2C-*

Rear Coil Spring, Bump Stopper and Spring 

Upper Seat Removal and Installation................2C-1

Rear Coil Spring, Bump Stopper and Spring 

Upper Seat Check............................................. 2C-*

Lateral Rod Removal and Installation ................. 2C-*
Lateral Rod Inspection ........................................ 2C-*
Rear Axle Removal and Installation .................... 2C-*
Rear Axle Check ................................................. 2C-*
Trailing Arm Removal and Installation ................ 2C-*
Trailing Arm Inspection ....................................... 2C-*

Specifications....................................................... 2C-*

Tightening Torque Specifications........................ 2C-*

Wheels and Tires ......................................2D-*

Precautions........................................................... 2D-*

Precautions in Wheels and Tires Servicing......... 2D-*

General Description ............................................. 2D-*

Tires Description ................................................. 2D-*
Wheels Description ............................................. 2D-*
Radial Tire Waddle Description........................... 2D-*
Radial Tire Lead / Pull Description...................... 2D-*

Repair Instructions .............................................. 2D-*

Wheel (with Tire) Removal and Installation......... 2D-*
Wheel Inspection................................................. 2D-*
Tire Inspection..................................................... 2D-*
Tire Balance Procedures..................................... 2D-*
Tire Rotation........................................................ 2D-*
Tire Mounting and Dismounting .......................... 2D-*
Tire Repair .......................................................... 2D-*

Specifications....................................................... 2D-*

Wheels and Tires Specifications ......................... 2D-*
Tightening Torque Specifications........................ 2D-*

NOTE
For the items with asterisk (*) in the “CONTENTS” below, refer to the same section of the service manual 
mentioned in the “FOREWORD” of this manual.

Summary of Contents for Wagon R

















































































































































































































































Reviews:

No comments

Related manuals for Wagon R

Lange Originals HOIST-A-TOP JL CRANK Installation Instructions Manual preview
HOIST-A-TOP JL CRANK
Brand: Lange Originals Pages: 13
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Victory 4x4 5TH GEN 4RUNNER Install Instructions preview
5TH GEN 4RUNNER
Brand: Victory 4x4 Pages: 5
Keith WALKING FLOOR Helpful Hints preview
WALKING FLOOR
Brand: Keith Pages: 2
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
Caltrend CV445 Installation Instructions preview
CV445
Brand: Caltrend Pages: 2
Audiovox EM-2201 Installation Instructions preview
EM-2201
Brand: Audiovox Pages: 1
EGR EGR-3PVE-COLOUR Installation Instructions Manual preview
EGR-3PVE-COLOUR
Brand: EGR Pages: 28
Vauxhall Astra 2021 Owner'S Manual preview
Astra 2021
Brand: Vauxhall Pages: 259
Magneti Marelli 350203061230 Installation Instruction preview
350203061230
Brand: Magneti Marelli Pages: 2
Cadillac Escalade 2004 Escalade ESV Owner'S Manual preview
Escalade 2004 Escalade ESV
Brand: Cadillac Pages: 472
Kia Optima 2004 Owner'S Manual preview
Optima 2004
Brand: Kia Pages: 233
Mercedes-Benz ML 320 CDI Operator'S Manual preview
ML 320 CDI
Brand: Mercedes-Benz Pages: 585
Havis-Shields Telescoping Computer Base C-TCB-34 Install Instructions preview
Telescoping Computer Base C-TCB-34
Brand: Havis-Shields Pages: 1
PEUGEOT 106 2001 Owner'S Manual preview
106 2001
Brand: PEUGEOT Pages: 107
Rigid Hitch BULL BAR Installation Instructions preview
BULL BAR
Brand: Rigid Hitch Pages: 2
Renault Laguna III Manual preview
Laguna III
Brand: Renault Pages: 3699

Brands by name

Popular brands

Load more brands