– 5 –
2. The following accessories can be assembled to your
brush cutter. a) blade, b) nylon string head.
a) WHEN USING A BLADE, ENSURE THE
CORRECT GUARD IS FITTED.
b) WHEN USING A NYLON STRING HEAD,
ENSURE THE CORRECT GUARD IS FITTED.
When using the unit hold the front part of the machine
(blade or nylon string head) below your waist.
NYLON STRING HEAD:
Always make sure it has been correctly assembled (see
section ASSEMBLY and relevant chart).
The nylon string head is suitable to mow a lawn to trim
grass and weeds on edges or wherever there might be
obstacles like trees, fences or walls.
The nylon string head also reduces the likelihood of
damaging small plants and trees bark.
BLADE:
Always make sure it has been correctly assembled (see
section SAFETY and ASSEMBLY and relevant chart).
When fitting or changing a cutting device, ensure you
follow the instructions in the section “fitting a blade or
nylon string head” with extreme precision. Fit these
cutting devices using all and only the parts described,
and in the correct order.
3
BLADES:
You can cut any type of grass, bushwood or shrub.
Operate the machine like a sickle always cutting at full
throttle.
N.B. This machine is designed so that the blade or
nylon string head is mounted for rotation in the
anticlockwise direction.
4.
WARNING:
Always use a well sharpened blade.
A blade with worn teeth besides providing poor
performance, might also generate a sudden thrust. This
can result in a violent sideways kick caused when the
blade touches against solid bodies. Such thrust might
then cause the operator to lose control of the machine
itself. Do not attempt to use a damaged blade but
replace it with a new one.
THRUST:
Can occur when using any type of blade
within the risk area
; therefore it is advisable to cut
using the remaining area of the blade.
Fig. 3-2
Fig. 3-3
Fig. 3-4
