MARTINS Industries MW-60, Manual

Page: 8 / 40

06
|
ENGLISH
The pressure sensor is broken. The inflator must be replaced. Er1
TROUBLE SHOOTING
Connected tire pressure is too
high pressure.
Wrong connections in air inlet
and outlet.
Low voltage.
Calibration error.
The air source is lower than the
set pressure.
Unstable pressure, faulty
hose connector.
Stop inflating the tire.
Refer to wiring diagram and connect
magnetic valve accordingly.
Check the electrical power source.
The automatic inflator needs to be
calibrated, contact Martins Industries.
Stop inflating the tire - refer to inlet
pressure specifications.
Replace hose connector or re-connect
hose to the tire.
Er3
Er4
Er5
Er6 and Er7
Er8
Er2
PROBLEMS POSSIBLE CAUSE SOLUTIONS