Page 22
Stylos User's Manual
No Output
No Output
No Output
No Output
No Output
Check that all your system components are turned on.
Check your speaker wires and connections.
Check all interconnecting cables.
Weak Output, Loss of Highs
Weak Output, Loss of Highs
Weak Output, Loss of Highs
Weak Output, Loss of Highs
Weak Output, Loss of Highs
Check the power cord. Is it properly connected to the
speaker?
Exaggerated Highs, Brightness
Exaggerated Highs, Brightness
Exaggerated Highs, Brightness
Exaggerated Highs, Brightness
Exaggerated Highs, Brightness
Check the toe-in of the speakers. Read
Room Acous-
Room Acous-
Room Acous-
Room Acous-
Room Acous-
tics
tics
tics
tics
tics
for more information.
Lack of Bass
Lack of Bass
Lack of Bass
Lack of Bass
Lack of Bass
Check your speaker wires. Is the polarity correct?
Poor Imaging
Poor Imaging
Poor Imaging
Poor Imaging
Poor Imaging
Check placement. Are both speakers the same distance
from the walls? Do they have the same amount of toe-
in?
Check the polarity of the speaker wires. Are they con-
nected properly?
Troubleshooting
Low Frequency (60Hz) Hum
Low Frequency (60Hz) Hum
Low Frequency (60Hz) Hum
Low Frequency (60Hz) Hum
Low Frequency (60Hz) Hum
If the Stylos hum when the amplifier is turned on, but not
playing music, the cause may be a ground loop. A
ground loop is caused by a difference in the ground
potential in the A.C. line. To eliminate this loop, use a
ground lift adaptor on the Stylos A.C. cord.
Popping and Ticking Sounds, Funny Noises
Popping and Ticking Sounds, Funny Noises
Popping and Ticking Sounds, Funny Noises
Popping and Ticking Sounds, Funny Noises
Popping and Ticking Sounds, Funny Noises
These occasional noises are harmless and will not hurt
your audio system or your speakers. All electrostatic
speakers are guilty of making odd noises at one time or
another.
These noises may be caused by dirt and dust particles
collecting on the speaker, by high humidity or by AC line
fluctuations that may occur in your area.
Dirt and dust may be vacuumed off with a brush attach-
ment connected to your vacuum cleaner or you may
blow them off with compressed air.
DO NOT SPRAY ANY KIND OF CLEANING
DO NOT SPRAY ANY KIND OF CLEANING
DO NOT SPRAY ANY KIND OF CLEANING
DO NOT SPRAY ANY KIND OF CLEANING
DO NOT SPRAY ANY KIND OF CLEANING
AGENT ON OR IN CLOSE PROXIMITY TO THE
AGENT ON OR IN CLOSE PROXIMITY TO THE
AGENT ON OR IN CLOSE PROXIMITY TO THE
AGENT ON OR IN CLOSE PROXIMITY TO THE
AGENT ON OR IN CLOSE PROXIMITY TO THE
ELECTROSTATIC ELEMENT.
ELECTROSTATIC ELEMENT.
ELECTROSTATIC ELEMENT.
ELECTROSTATIC ELEMENT.
ELECTROSTATIC ELEMENT.
