for a more chaotic effect by switching on multiple buttons at once.
Echo and Repeat
The
Echo
knob controls how much of the echo is applied to the sound, like a dry/wet
control. Higher values result in a more intense effect, while lower values will be more
subtle.
The
Repeat
knob acts much like a feedback control to extend the number of delays you
hear. Feedback works by routing the delayed output signal back into the input to create a
“feedback loop”. Higher values on the Repeat knob will extend the delay multiple times,
while lower values will only add a few, or even one echo.
DANGER:
High values of Repeat can cause extreme feedback loops. We recommend that
you use the LEM Echo Music plugin with a limiter activated on your master channel to
prevent damage to your payback equipment and to your hearing.
Tip: Manipulating the Repeat control during playback will change the unit’s
properties in real time, resulting in the pitch of the echoes being lowered or raised,
emulating a waveform on a tape being played back at different speeds.
Volume
The
Volume
slider controls the level of the signal coming out of each channel, after the
delay processing. Its default setting of 10 represents unity gain, and it can be lowered all
the way to -inf dB.
Lem Echo Music
11 / 15
Version 1.0.1
