RUSH SM 850
TM
User Manual
12
Remote control
The SM 850 fog machine comes with 2 remote control options: a wired remote
control and a 4-channel wireless remote control. There are two identical sockets
on the rear panel so that both remote controls may be connected and used at the
same time.
Wired remote control
The wired remote control has a 4.5 m (15 ft.) cable that plugs into either remote-
control socket on the rear panel. The status LED on the remote control is off while
the machine is heating and lights green when the fog machine is ready for use.
4-channel wireless remote control and receiver
The 4-channel wireless remote control transmitter (shown below to left) has a
range of 30 meters (100 feet). It provides individual control of up to 4 fog
machines and simultaneous control of an unlimited number of machines in up to 4
groups.
The remote-control receiver (shown above to right) connects to a remote-control
socket on the rear panel. It has green (ready) and red (heating) LEDs to show the
machine’s status.
The DIP switch on the side of the receiver sets the remote-control button that
triggers the machine. Flip the switch that corresponds to the desired transmitter
button to the ON position. Flip all other switches to OFF. The fog machine
responds to all buttons for which the DIP switch is in the ON position.
