17
Service and Maintenance
3.
Carefully turn the motor and mirror clockwise (make sure the motor axle
does not turn) until there is a distance of 1/2 to 1 mm (1/64 - 1/32”)
between the edge of the mirror bracket (C2) and the top mechanical stop
(C1).
4.
Tighten the set screws.
5.
Use the controller to reset the fixture and move the mirror through all
extreme positions, checking that the bottom mechanical stop (D1) does
not touch the edge of the mirror bracket (D2). If it does, then readjust as
described above, making the distance between C2 and C1 even smaller.
Summary of Contents for RoboScan Pro 518
Page 1: ...RoboScan Pro 518 user manual...
Page 24: ......
