manualshive.com logo in svg

Martin Mania SCX500, User Manual

Share
Download
Martin Mania SCX500 User Manual Download Page 5

Introduction

5

1. I

NTRODUCTION

Thank you for selecting the Martin Mania SCX500. This automated 
moving-mirror projector has the following features:

• Automatic triggering and music triggering modes
• Stand-alone single fixture and master/slave operation, both with auto 

trig and music trig

• DMX controllable, choice of 6- or 8-channel DMX control modes
• 12 pre-programmed macros
• 15 full colors (including white) and 5 multi-colors. Split color feature for 

added color capability

• 16 gobos
• 180° pan and 72° tilt
• Adjustable focus
• 15° beam angle
• 150 watt long-life halogen lamp
• Versatile mounting options

 

U n p a c k i n g

The packing material is carefully designed to protect the fixture during 
shipment - always use it to transport the fixture. 

The Mania SCX500 is supplied with:

• Lamp (installed)
• Power cable
• 5 meter (16.4 ft.) RS-485 XLR cable for data link
• User manual
• Mounting U-bracket and mounting plate
• Fasteners for U-bracket and mounting plate

Important! The mounting plate is attached to the fixture with thumb 

screws to protect the mirror, and the mirror assembly is 
secured for transport. Before applying power, remove the 
mounting plate, remove any transport packaging, and cut and 
remove any plastic tie-wraps holding the mirror!

Summary of Contents for Mania SCX500





































Reviews:

No comments

Brands by name

Popular brands

Load more brands