Martin Magnum Pro 2000 User Manual Download Page 4

4

Introduction

 

S A F E T Y

This product is for professional use only. It is not for household use. For safe
usage, read this manual before powering or installing the device, follow the safety
precautions listed below and observe all warnings in this manual and printed on the
device. If you have questions about how to operate the device safely, please contact
your Martin dealer or call the Martin 24-hour service hotline at +45 70 200 201.

• Keep the output nozzle at least 

60 cm

 (

24

 inches) away from people and objects.

• Never point the output at people’s heads or place your hand over the nozzle.

• Disconnect the device from AC power before refilling the fluid tank or servicing. 

• Use specified fog fluid only. 

• Always ground (earth) the device electrically. Use only a source of AC power that 

complies with local building and electrical codes and has both overload and ground-
fault protection. 

• Do not expose the device to rain. 

• Never operate the smoke machine if it is damaged or if parts are missing.

• Never attempt to bypass the thermostatic switch or fuses. Always replace defective 

fuses with ones of the specified type and rating.

• Allow the device to cool before handling. 

• Refer all service not described in this manual to a qualified technician. 

• Do not install the smoke machine directly over people. 

• When suspending the device above ground level, verify that the structure can hold 

at least 10 times the weight of all installed devices. Use an approved means of 
secondary attachment such as a safety cable. 

• Block access below the work area whenever installing or removing the device. 

Summary of Contents for Magnum Pro 2000













Reviews: