Martin MAC Encore Performance, User Manual, Page: 2 / 7

Field engineering change order
2 of 7 MAC Encore Performance - How to replace the animation wheel, number 15122017,
date 15-12-2017, revision A
Field engineering change order, number 15122017:
PRODUCT
Type/model: MAC Encore Performance
Description: Moving head
Serial number: All units before serial number 15029579147
Date introduced 15 December 2017
CHANGES
Problem: Field reports indicate that the animation wheel can warp under special usage patterns. The warping
can potentially cause an animation error that will turn the light off as a safety precaution.
There is no risk of personal injury.
Typical fault signs: The animation wheel moves in and out of focus when it is rotated. An animation and gobo error may
appear.
Solution: Replace the animation wheel with the new type. Follow the instructions in “Procedure on replacing the
animation wheel” on page 4 on how to remove the multimodule and replace the animation wheel.
Terms: This document only applies to the MAC Encore Performance fixtures that were delivered with the first
type of animation wheel that does not have the positioning notch.
ENCLOSED
Document: See the procedure in “Procedure on replacing the animation wheel” on page 4.
Components: -
APPROVAL
Date: 15 December 2017
Approved by: Senior Manager, Global Product Support, Henrik Christensen