Martin MAC Allure Wash PC, User Manual

Page: 12 / 34

12 MAC Allure Wash PC User Guide
Fixture setup
The onboard control panel (see “Effects” on page 5) and the Control / settings DMX channel let you
configure the fixture via a range of fixture settings.
Fixture ID
The MAC Allure Wash PC lets you set a four-digit ID number to ease identification of the fixtures in an
installation. When a fixture is powered on for the first time, it displays its DMX address by default. As soon
as you set an ID number other than
0 in FIXTURE ID , the MAC Allure Wash PC will display this ID number
by default, and indicate FIXTURE ID in the display.
Personality
The MAC Allure Wash PC provides several options that let you optimize the fixture for different applications
in the
PERSONALITY menu:
• The PAN/TILT menu lets you swap and/or invert pan and tilt. It also lets you set minimum and maximum
limits for pan and tilt.
• The SPEED menu lets you set PAN/TILT to NORMAL , FAST (optimized for speed) or SLOW (optimized
for smooth movement – useful for slow movements in long-throw applications). Likewise, you can select
an overall speed for all the effects by setting
EFFECT speed to NORMAL , FAST or SLOW . You can also
set effect speed to FOLLOW P/T , in which effects will always use whatever speed is set for pan and tilt.
• DIMMER CURVE provides four dimming options (see Figure 3):
- LINEAR – (optically linear) the increase in light intensity appears to be linear as DMX value is
increased.
- S-CURVE – light intensity control is finer at low levels and high levels and coarser at medium levels.
This curve emulates the RMS voltage dimming characteristics of an incandescent lamp such as the
tungsten halogen lamp of the Martin™ MAC TW1™.
- SQUARE LAW – light intensity control is finer at low levels and coarser at high levels.
- INV SQUARE LAW – light intensity control is coarser at low levels and finer at high levels.
• TUNGSTEN EMULATOR lets you choose to have the look and feel of a tungsten lamp. Color temperature
and dimming characteristics emulate tungsten lamp behavior, with a shift towards warmer white when you
dim the fixture down.
• COLOR MODE offers two options that affect color saturation and evenness between fixtures:
- Extended Color mode optimizes LED deployment for color saturation and gets the deepest color
saturation possible from the LEDs. The white color point is calibrated and even across different fixtures,
but as the fixture approaches full color saturation there can be very small differences in color rendition
between different fixtures.
- Calibrated Color mode optimizes LED deployment for even color rendition between fixtures. All fixtures
display identical color from white point to full color saturation, and maximum color saturation levels are
limited slightly to ensure this.
Output
DMX % DMX % DMX % DMX %
Output Output Output
Linear S-curve Square law Inverse square law
Figure 3: Dimming curve options