14
MAC 2000 Wash Barndoors
The lens should sit snugly against the four rubber-encased posts marked in the following illustration.
11 Install the four plates the hold the lens against the chassis (J) by pushing up on the spring-loaded bolts and
sliding the plates into position against the rubber-coated posts (indicated with an arrow in the following
illustration).
12 Hold the rotation assembly (I) over the lens chassis in the neutral position described in step 4 on page 11.
Gather the slack in the rubber drive belt of the rotation assembly in your fingers over rollers F, G and H,
ensuring that there are no twists, and place the rotation assembly onto the lens chassis (J). Do not press, or
force, the ring into place.