![background image](http://html1.mh-extra.com/html/martin/elp-cl/elp-cl_user-manual_1732776018.webp)
18
Martin ELP CL Profile user guide
Fixture information
The INFORMATION menu allows you to view various fixture information: Power on time, LED
hours, Software version, Fixture ID, RDM unique ID, Fan speeds, temperatures.
Viewing live DMX values
This menu allows you to view the current DMX values for any function.
Select the DMX LIVE menu and press ENTER.
Use the UP and DOWN buttons to select the function you wish to view.
Setting control values manually
You can manually set control values. This may be useful when testing, or to use the fixture in a
static setting without a DMX controller.
This menu also allows you to reset the fixture.
Reset
To reset the fixture, go to the MANUAL CONTROL menu and press ENTER. Use the UP and
DOWN buttons to select RESET and press ENTER again.
Then use UP and DOWN to select YES, and press ENTER to activate.
Setting values
Go to the MANUAL CONTROL menu and press ENTER. Use the UP and DOWN buttons to select
the function you wish to control.
Once you have selected a function, press ENTER, then use the UP and DOWN buttons to select a
value from 0 to 255.
Press MENU to go back up and select a different function to control.
Setting a sequence of scenes
The SHOW menu allows the fixture to store up to 20 scenes internally and display them in a timed
sequence.
SET SCENE TOTALS sets how many scenes will be in the sequence, from 1 to 20.
To store scenes, select EDIT SCENE COLOR and press ENTER. Then use the UP and DOWN
buttons to select the scene number to be edited. Press ENTER. Use the UP and DOWN buttons to
select the color to be set (RED, GREEN, BLUE, LIME, AMBER), then press ENTER and finally
use the UP and DOWN buttons to set the brightness of the color.
The FADE TIME option sets the fade time between scenes, from 0-120 seconds (default 3
seconds).
The HOLD TIME option sets the time each scene is shown for, from 0-600 seconds (default 3
seconds).
Color calibration
From the SERVICE menu you can select CALIBRATION. This menu allows you to adjust the
overall brightness and individual colors of the fixture to match with other fixtures. The fixture is
calibrated in the factory but over time the brightness of the LED emitters will gradually reduce, so
this function can be useful if you need to match a new fixture with older ones.
DIMMER sets the overall maximum brightness of the fixture.
RED, GREEN, BLUE, LIME, AMBER can be made dimmer or brighter from -128 to 127.
LOAD DEFAULTS will load the factory set calibration values.
SAVE DEFAULTS will replace the factory set calibration values with the current calibration
settings.