Martin Cyclo Directional IP65, User Manual

Page: 10 / 48

10 Cyclo IP65 Directional user manual
Access to connections compartment
Various operations described in the is manual require access to the
connections compartment in the base module. To access the connections
compartment:
1. See Figure 3. Remove the two screws from the ends of the connections
compartment cover.
2. Open the hinged release flap (A) and then open the hinged cover (B).
Avoid damaging the seal on the inside of the cover.
3. To close the connections compartment, first close the hinged cover (B),
then close the release flap (A) so that it clips down over the cover. The
seals on the inside faces of covers must be in perfect condition to
maintain their waterproof qualities. Avoid damaging them. Any seal that
is not in perfect condition must be replaced by a Martin service agent.
4. Tighten the two screws at either end of the cover before applying power.
A
B
Figure 3: Opening the connections compartment cover
www.carlosmendoza.com.mx