![background image](http://html1.mh-extra.com/html/martin/bv4536/bv4536_installation-and-operating-instructions-manual_1732712027.webp)
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
26
FOR YOUR SAFETY READ BEFORE LIGHTING
WARNING:
If you do not follow these Instructions exactly, a fire or explosion
may result causing property damage, personal injury or loss of life.
5.
Wait five (5) minutes to clear out any gas. Than
smell for gas, including near the floor. If you smell
gas, STOP! Follow “B” in the safety information
below on this label. If you don’t smell gas, go to the
next step.
6.
Turn on all electric power to appliance.
7.
Turn RS-OFF-ON rocker switch to “ON”
8.
If the appliance will not operate, follow the
instructions “To turn Off Gas To Appliance” and
call you service technician or gas supplier.
1.
STOP! Read the safety information
below on this label.
2.
Set the switch to “OFF”
3.
Turn off all electric power to the
appliance.
4.
This appliance is equipped with an
ignition device which automatically
lights the burner. Do not try to light
the burner by hand.
Electronic Gas Valve
LIGHTING INSTRUCTIONS
ELECTRONIC IGN
1.
Turn RS-OFF-ON rocker switch to “OFF”.
2.
Turn off all electric power to the appliance if service is to be performed
TO TURN OFF GAS TO APPLIANCE
A. This appliance is equipped with an ignition
device which automatically lights the pilot. Do
not try to light the burner by hand.
B. BEFORE OPERATING smell all around the
appliance area for gas. Be sure to smell next to
the floor because some gas is heavier than air
and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS
*
Do not try to light any appliance
*
Do not touch any electric switch; do not use
any phone in your building.
*
Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier’s
instructions.
*
*If you cannot reach your gas supplier, call the
fire department.
C. Turn off all electric power to appliance.
D. Do not use this appliance if any part has
been under water. Immediately call a
qualified service technician to inspect the
appliance and to replace any part of the
control system and any gas control which
has been under water.