Martin AW6S7246AX, User Manual

Page: 32 / 76

Problem Possible solution
The washing results are
not satisfactory.
• Increase the detergent quantity or use a different detergent.
• Use special products to remove the stubborn stains before
you wash the laundry.
• Make sure that you set the correct temperature.
• Decrease the laundry load.
Too much foam in the
drum during the washing
cycle.
• Reduce the quantity of detergent.
After the washing cycle,
there are some deter‐
gent residues in the dis‐
penser drawer.
• Make sure that the detergent insert is in the correct position.
• Make sure you have used the detergent dispenser according
the indications given in this user manual.
After the check, activate the appliance. The programme continues from the point of interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the display shows other alarm codes, deactivate and activate the appliance. If the problem
continues, contact the Authorised Service Centre.
CONSUMPTION VALUES
Stated values are obtained in laboratory conditions with relevant stand‐
ards. Different causes can change the data: the quantity and type of laun‐
dry and ambient temperature. Water pressure, the supply voltage and the
temperature of inlet water may also affect the washing programme dura‐
tion.
Technical specifications may be changed without prior notice to improve
the quality of product.
Programmes Load
(kg)
Energy
con‐
sump‐
tion
(kWh)
Water
con‐
sump‐
tion (li‐
tre)
Approxi‐
mate
pro‐
gramme
duration
(mi‐
nutes)
Remain‐
ing
mois‐
ture
(%)
1)
Coton
60°C
7 1.41 79 230 53
Coton
40°C
7 0.96 80 205 53
Synthétiques
40°C
3 0.68 68 130 35
32