STEP 3 : INSTALL THREADED ADJUSTMENT ASSEMBLY
1.
Place the adjustment assembly against the frame as shown in diagram below.
2.
Secure the adjustment assembly to the frame using the three button head screws and nuts provided.
3.
Put the
1/2”
nut on the
1/2”
x
4”
bolt and thread the bolt into the tapped hole of the adjustment
assembly. Use the
1/2”
nut to lock the
4”
adjustment bolt in place once the desired minimum depth set-
ting has been determined.
3
3/8”
x 1
1/4”
BUTTON HEAD ALLEN
3/8”
-
16
FLANGE NUT
SB
-
02 STOP BLOCK
1/2”
-
13
X
4”
BOLT
1/2”
-
13
JAM NUT
NOTE: IF USING THE CAM ADJUSTER OPTION SKIP THIS STEP
AND PROCEED TO STEP 4
