3, Adjust A, B two channel knob to right position, adjust the appropriate volume for MIC/A or
MIC/B, let you in high enjoy to sing and listen.
4, Pull up the power cord when long time not in use.
5, Receiver should be putted in the top position and pull-out the antennas for best operation.
Handheld microphone operation
1, Turn on the power switch in receiver.
2, Push the power switch in microphone to PWR position, check the power capacity of
batteries.
3, Check the multifunction display of receiver, to make sure the radio signals was receiving.
4, Push the power switch in microphone to “ON” (open) position, push the MUTE switch to
“OFF” position.
5, The MUTE switch should be pushed to “ON” (muting on) when the microphone is not in
use during singing or speech.
6, Power switch must be pushed to “OFF” (close) position to save power when the
microphone is not in use in the end of singing or speech.
Features and control functions for Belt-pack transmitter
Belt-pack transmitter
1, Battery cover: Push forward to open the battery cover
2, Turn on power switch “ON”, reverse is “OFF”
3, Power light
4, Input socket: Insert and tighten in a clockwise.
5, Collar microphone: it can be caught in the collar, tie, or other instrument to use.
Summary of Contents for U-6800R
Page 5: ......
