Martin Professional Outdoor ViroSphere, Manual

Page: 3 / 12

3
Introduction
Thank you for selecting the Outdoor ViroSphere. The Outdoor ViroSphere is
a circular flat panel speaker designed especially for outdoor venues where
high quality omnidirectional sound is required.
The acoustic design of the Outdoor ViroSphere combines a very flat design
with an audio performance with a strong emphasis on good speech
intelligibility. Sound pressure from the Outdoor ViroSphere drops linearly
over distance which results in a very uniform sound pressure throughout the
venue.
Outdoor ViroSpheres can be supported either by the Martin Architectural
ViroSub sub-woofer or by the bass output from a main PA in the installation.
Features
• Wall mountable, plus many other mounting options with the broad range of
Viro mounting accessories
• Light reflecting capability
• Sturdy, IP 65 weather proof mechanical cabinet
• Based on NXT* technology
• Patent pending poly carbonate Acoustic Board Design
• Designed to provide sound to a 10 x 10 metre (33 x 33 foot) area
Safety information
Read this manual before powering or installing the Outdoor ViroSphere,
follow the safety precautions listed below and observe all warnings in this
manual and on the Outdoor ViroSphere. If you have questions about how to
operate the Outdoor ViroSphere safely, please contact your Martin
Architectural dealer or call the Martin Professional 24-hour service hotline at
+45 70 200 201 (or in the United States at 888-TECH-180).
• Do not open the Outdoor ViroSphere. There are no user-serviceable parts
inside.
• When installing the Outdoor ViroSphere above ground level, verify that the
structure can hold at least 10 times the weight of all installed devices.
• Block access below the work area whenever installing or removing the
Outdoor ViroSphere.
• Do not modify the Outdoor ViroSphere or install other than genuine Martin
parts.
• Refer all service to a Martin Architectural service technician.