7
Align the Black Pips on the
handle with the Yellow
Slide the selector inwards to
the Compress position
Rotate handle clockwise until it
clicks a few times
Step 3
-
Take the Reading
Press and hold to display the moisture content of
the sample. Keep holding the button until the reading
has stabilised. Releasing
will freeze the value for
approximately 7 seconds, note and record this value
as required.
To change the crop type:
Display Codes
_ _ _
Standby mode
U
-
R
Under measurement range
The sample is too dry or too cold. Can also display if the
sample is less than 10ml or not compressed.
O
-
R
Over measurement range
The sample is too wet.
ATC
(flashing)
Automatic Temperature Correction (ATC) deactivated
+/
-
Crop calibration has been adjusted with a –ve or +ve bias
Battery indicator
Press
to put instrument in
standby mode
Use
Λ
or
V
to scroll to the crop
Press and release
+
_ _ _
Bluetooth on
