background image

 

All material © 2008. Martin Audio Ltd. Subject to change without notice. 

 

7 Cable 

lengths 

 
When connecting W8VDQ systems to an amplifier, it is recommended that the return resistance of the 
cable used is less than one tenth of the nominal impedance of the system or systems in parallel. The table 
below gives an indication of the maximum permissible cable runs for various conductor cross-sectional 
areas. 

 

 

 
 
 

8 Warranty 

Martin Audio ceiling loudspeaker products are warranted against manufacturing defects in materials or 
craftsmanship over a period of 5 years from the date of original purchase. 

During the warranty period Martin Audio will, at its discretion, either repair or replace products which 
prove to be defective provided that the product is returned in its original packaging, shipping prepaid, to 
an authorised Martin Audio service agent or distributor. 

Martin Audio Ltd. cannot be held responsible for defects caused by unauthorised modifications, 
improper use, negligence, exposure to inclement weather conditions, act of God or accident, or any 
use of this product that is not in accordance with the instructions provided by Martin Audio. Martin 
Audio is not liable for consequential 
damages. 

This warranty is exclusive and no other warranty is expressed or implied. This warranty does not 
affect your statutory rights. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Preliminary Nov 2008 

Summary of Contents for W8VDQ













Reviews: