MLA Mini
User Guide V1.0
13
MLA MINI
USER GUIDE
Universal tilt bracket
This can allow an array of 4 Minis to be fitted to the Variable Height Pole Mount at a range of tilt
angles. The bracket’s fixing is via a single 13 mm dia. hole, which is fitted with a boss to mate
with the Pole Mount. By replacing the boss with a trigger clamp, the bracket can also be used
inverted, to fly a single 4 x Mini array (without an MSX sub). The Flying Frame (see above) must
be used to fly all other system configurations.
Fixed Tilt Bracket
This is a simpler alternative to the Universal Tilt Bracket, for use with the Vertical Height Pole
Mount. It provides a single tilt angle (14.5°), which is correct for use with two of the presets
most likely to be used with pole mount configurations.
Variable Height Pole Mount
This is used to elevate an array of 4 Minis above the MSX as a single assembly. The height of the
array can be set to that required (either determined by the preset in use or according to the VU-
NET specifications) by turning the handle, and then locked in position with the integral clamp.
