Q Series Operation Manual
11
QUICK GUIDE OVERVIEW 6
44dB
41dB
38dB
35dB
32dB
29dB
26dB
23dB
141V*
118V
100V**
85V
71V
59V
50V
42V
*100Vrms **70Vrms
Ser. N:o
Removed!
SPEAKER OUTPUTS
BALANCED INPUTS
CH D
CH B
CH C
CH A
WIRING
NORMAL: CLASS 2
PUSH
PUSH
Must be grounded
200-240VAC 50-60Hz :2300W
.
6..1 The dIP switch features
The following features may be adjusted using the
DIP switches on the rear-panel of the amplifier.
Gain
- Set for all four channels from +23 dB to +44
dB in 3 dB steps.
Option active
- Available for future upgrades.
fan Masked
- When on, engages the intelligent
fan feature lowers fan speed when no signal is
present.
VPL -
Voltage Peak Limiter adjustment is
provided for 8 individual levels. Select the setting
most appropriate for connected speakers. See
Appendix for details.
Mode -
Select VPL mode between Hard and Soft. For
channels driving sub-woofers and Lo-end frequen-
cies, it is recommended to use the Hard setting for
optimal operation. For mid and hi-end drivers, always
select Soft.
Mains input 115V or
230V operation
(Not selectable)
NomadLink
network In and Out
on EtherCon housed
RJ45 connections
DIP switches
for adjusting key
features
(See below)
3-pole Phoenix
input connectors
2-pole screw
terminal output
connections
6. Rear Panel overview
All material © 2007. Martin Audio Ltd. Subject to change without notice.
