background image

Martin Audio – MA200Q Amplifier

E

NGLISH

17

11

 

WARRANTY

General

The MA200Q Power amplifier is warranted to be free from defects in components and factory
workmanship under normal use and service, for a period of 

thre

e years from the date of original purchase.

During this warranty period MARTIN AUDIO LTD or it's nominated agents, will undertake to repair, or at
it's discretion, replace this product at no charge to it's owner, when failing to perform as specified,
providing the unit is returned undamaged, in it's original packaging, shipping prepaid, to the factory,
distributor or authorised service facility.

This warranty shall be null and void, if the product is subjected to:
1)

Repair work or alteration by persons other than those authorised by MARTIN AUDIO LTD
or it's agents.

2)

Shipping accidents, act of god, war, civil insurrection, misuse, abuse, operation with incorrect AC
voltage, operation with faulty associated equipment, exposure to inclement weather conditions and
normal wear and tear. Units on which the serial number has been removed or defaced will not be
eligible for warranty service.

3)

MARTIN AUDIO LTD shall not be responsible for any incidental or consequential damages, with
respect to the products warranted.

MARTIN AUDIO LTD reserve the right to make changes or improvements in design or manufacturing,
without assuming any obligation to change or improve products previously manufactured.

This warranty is exclusive and no other warranty is expressed or implied.
This warranty does not effect your statutory rights.

International

Please contact your supplier for this information, as rights and disclaimers may vary from country to
country.

Technical assistance and services

If your Martin Audio product needs repair, contact your Martin Audio dealer or distributor, or contact
Martin Audio to obtain the location of the nearest dealer or distributor.
Telephone: +44 (0) 1494 535312
Fax: +44 (0) 1494 438669
E mail: [email protected]

www

.martin-audio.com

Summary of Contents for MA200Q






















Reviews: