background image

1 INTRODUCTION

Thank you for purchasing a Martin Audio EM Series loudspeaker system.
The EM15 is a miniature trapezoid full-range loudspeaker featuring twin
5"(125mm) drivers in a unique two-way configuration utilising patented
ICT™ (Inductively Coupled Transducer) technology.  The EM150 is a twin
10"(250mm) driver sub-bass system designed to be used to extend the low
frequency performance of the EM15.  It can also be used with larger EM
Series enclosures such as the EM26.

Ideally suited to background and foreground music reproduction, the EM15
and EM150 are compact and easily installed.  An external crossover is not
necessary, but an EMX1A controller will increase the versatility of the
complete system, adding relative level control and driver protection.

2 UNPACKING

Each Martin Audio loudspeaker is built to the highest standard and
thoroughly inspected before it leaves the factory.  After unpacking the
system, examine it carefully for any signs of transit damage and inform 
your dealer if any such damage is found.  It is suggested that you retain 
the original packaging so that the system can be repacked at a future date
if necessary.

Please note that Martin Audio and its distributors cannot be held
responsible for damage to any returned product through the use of 
non-approved packaging.

Martin Audio – EM SERIES

E

NGLISH

2

This equipment conforms to the requirements of the
EMC Directive 89/336/EEC, amended by 92/31/EEC
and 93/68/EEC and the requirements of the Low
Voltage Directive 73/23/EEC, amended by 93/68/EEC.

Standards Applied

EMC

Emission

EN55103-1:1996 

Immunity

EN55103-2:1996

Electrical Safety

EN60065:1993

CONTENTS

<

>

PRINT

GUIDES

Summary of Contents for EM15












Reviews: