CDD
User Guide V1.0
39
CDD
USER GUIDE
CSX SERIES SUBWOOFERS - INSTALLATION
CSX Subwoofers, having omnidirectional dispersion characteristics, will normally be floor-
mounted in a suitable location in the room. As the bass frequencies involved are essentially
non-directional, the location will be dictated simply by convenience and practicality. It is often
only necessary to use a single subwoofer cabinet with a stereo system, as the active crossover
will generate the mono LF feed required. See “System connections” on page 41 for more
details regarding system connections.
Any model of CSX subwoofer may be used in conjunction with any model from the CDD Series,
provided the appropriate parameters are set up in the loudspeaker management system. However,
practical combinations are likely to be as shown below:
CDD5
CDD6
CDD8
CDD10
CDD12
CDD18
CSX112
•
•
•
•
CSX212
•
•
•
•
•
CSX118
•
•
•
CSX218
•
•
FLYING CSX SUB-WOOFERS
CSX Series subwoofers may also be flown; ‘F’ versions are available for this purpose, pre-fitted
with threaded inserts to accept eye bolts. This option must be specified at the time of ordering,
as the inserts cannot be retro-fitted.
Shouldered eye bolts are used in the inserts in the same manner as for CDD Series cabinets.
Approved eye bolts are available from Martin Audio for the subwoofers: Part No. HTKCT06 –
M10 eye bolt, suitable for all CSX models.
IMPORTANT
Note that eye bolts for flying systems must be cast, shouldered fittings rated for the purpose.
Forged steel eye bolts of the type typically available from DIY suppliers are NOT suitable and
should not be used under any circumstances.
Summary of Contents for CCD10
