All material © 2007. Martin Audio Ltd. Subject to change without notice.
8 Recommended
controllers
Because the F8
+
, F10
+
, F12
+
, F15
+
, F215
+
, S12
+
, S15
+
and S18
+
are passive systems embodying correct
acoustic design principles, they can be used without a controller as long as their AES and peak power
ratings are not exceeded and care is taken to avoid amplifier clipping.
For maximum performance, however, we recommend that Blackline
+
Series systems are used with
Martin Audio
M3
+
,
DX1
,
DX2
or
Engineer
system controllers.
Controllers must, of course, be used with the bi-amplified H3
+
, and H3H
+
and the bi-amplified/tri-
amplified H3T
+
. Controllers must also be used when adding the S218
+
to a system as this very high
power subwoofer does not include a passive low-pass network.
8.1 M3
+
2 input, 4 output analogue system controller
The Martin Audio M3
+
2in-4out system controller provides optimised crossover, EQ and limiter functions for
bi-amplified Blackline
+
configurations (H3 or H3H), or for main-plus-subwoofer configurations (for instance,
F8
+
+ S12
+
, F10
+
+ S15
+
, F12
+
+ S18
+
or F15
+
+ S218
+
).
The M3
+
system controller may also be used as a simple equaliser and limiter for fully passive full-range
Blackline
+
applications.
Please refer to the M3
+
configuration notes later in this user guide for further information.
8.2
DX1
2 input, 6 output digital loudspeaker management system
The DX1 is a powerful 2in-6out DSP based audio processing unit for live applications and fixed
installations.
The unit is configurable in 5 basic modes (2x2 way, 2x3 way, 4 way, 5 way and 6 way crossover). Each
input has adjustable gain and delay. Each output consists of a high and low pass filter, 5 bands of
parametric equalisaton, limiter, delay (adjustable in 2.6 µs steps), gain and polarity controls.
DX1 system controllers are supplied pre-loaded with a wide range of Martin Audio presets. Bl
presets are available as binary files from
www.martin-audio.com
for loading via a pc.
Please refer to the DX1 user’s guide for further information.
8.3
DX2
4 input, 8 output digital loudspeaker management system
The new 4in-8out DX2 embraces the very latest advances in technology to meet the ever increasing
demand and expectations placed on professional audio systems. Based on a completely new processing
platform, running at 96kHz, the DX2 sets a new standard in terms of performance, flexibility and ease of
use.
The DX2 is a comprehensive digital loudspeaker management system, capable of being easily configured
to meet the most demanding applications in both fixed installation and live touring environments.
DX2 system controllers are supplied pre-loaded for a variety of Martin Audio live sound products. Bl
