like to pair with your phone, and asking you to confirm the code on your phone matches
the code on your M
ARTIAN
. If the codes match, tap “Pair” to complete the pairing
process. If the codes don’t match, tap “cancel” and try again.
6.
If you are using iOS 6 and wish to receive text messages on your M
ARTIAN
: After pairing
is completed, wait 5 seconds and then tap the > button to the right of “M
ARTIAN
W
ATCH
.”
Switch “Show Notifications” to “On”. Then tap the “Bluetooth” button on the top of the
screen to go back to the previous menu.
Note: If text messages don’t begin to appear, go back into the Bluetooth menu and turn
Bluetooth off and back on again, then press the bottom button on your M
ARTIAN
W
ATCH
to reconnect.
For Other Phones (may vary depending on phone):
1.
Turn on the Bluetooth function in the phone (follow the instructions in your phone’s User
Manual).
2.
If needed, turn Bluetooth visibility on in your phone (most phones do this automatically
when you turn on the Bluetooth function). This makes your phone discoverable to other
Bluetooth devices.
3.
Press both buttons on the Watch until the blue light flashes, then release.
4.
Press “YES” when “Add Device?” appears in your phone. If “Add Device?” does not
appear, review step 1. For some phones, you may need to enter a passcode. The default
passcode is 0000.
5.
A pop-up window will appear on your phone, telling you that M
ARTIAN
W
ATCH
would
like to pair with your phone, and asking you to confirm the code on your phone matches
the code on your Martian. If the codes match, tap “Pair” to complete the pairing process.
If the codes don’t match, tap “cancel” and try again.
With all phones, if pairing is successful, the Watch will vibrate and the blue light will flash
quickly 3 times, and when you tap the bottom button, you will see the Bluetooth icon on the
OLED display.
Setting the time
Gently pull out the crown and rotate it to set the time. When the time is set, push the crown back
in until you hear a click.
Range/Disconnected and Re-Connecting
After you have paired your Watch with a phone, some phones have the option in settings to
“always ask” or “always allow” the Watch to reconnect to your phone after you go out of range
and back in.
1.
Always Ask
If you choose “Always ask”, you will always be asked if you want to reconnect each time
the Watch and the phone are within range.
2.
Always Allow
