Note:
Turn the power off (unplug from the wall outlet) before replacing the bulb. Make sure the bulb has sufficient time to cool
down.
Assembly Instruction:
Step1. Unpack and place all parts on a surface or floor.
Step2. Put the lamp body (H2)on the table, Gently pull the cord so that the (H1) comes into contact with the body (H2).
Screw the (H1) onto the lamp body (H2).
Step3.Gently pull the cord so that the neck comes into contact with the body (H1).Screw the neck onto the lamp
body(H1).
Step 4.Raise the Harp Caps (E) and insert the bottom ends of Harp (D) into the Saddle (G.)
Step 5.Lower the Harp Caps (E) until they cover the two-pronged Saddle (G)
Step 6.Unscrew the Finial (A) from the Harp Top (C).
Step 7.Place the Shade (B) over the Harp (D) making sure the Harp Top (C) extends through the top ring of Shade (B).
Secure the Shade (B) by turning the Finial (A) onto the Harp Top (C) clockwise until tight.
Step8. Screw the light bulb into the Socket (F).
Step9. Assembly is completed.
Care instructions:
• Wipe with soft dry cloth only
• Always avoid the use of harsh chemicals or abrasive as they may damage to the finish.
Thank you for your purchase
Page 2 of 2
