Martem TELEM-AGC, User Manual

Page: 9 / 12

AS Martem Data Concentrator TELEM-AGC User Manual Rev. 1 / 2018
AS MARTEM Tel: +372 639 7979 martem@martem.eu www.martem.eu
-
9
-
6. Firmware update
NB! Before updating to new firmware read the setup from your device, and
make a backup.

Run GWS.exe and set up SSH connection with the device

Press the Upd
▼
button next to R W C
buttons

If you have compressed .7z firmware update
file (provided by Martem AS) choose Update
From File

If you do not have .7z firmware update file choose Check martem.ee to
refresh exsisting firmware versions list for this AGC-L device

Press Update to feature and choose needed firmware version. Download is
starting...

After firmware is downloaded Confirm window appears. Press Yes button, the
update process starts

Wait until the device resumes to its normal operation state ( RUN LED will start
slow blinking again)

Firmware update is complete.
Checking results of the firmware update operation:

Press R button to read back the device setup data

Check the Version from GWS Status tab