Martelli Bella Longarm Series, User Manual

Page: 14 / 43

FIGURE 2
2 3 4
9 8
6
1
10
11
12
13
1. Machine ready
2. Machine speed when running, display only
3. Set stitches per inch (1-15 ); 8 is the default S.P.I.
4. Number of stitches sewn
5. Reset to zero for stitches sewn
6. ---
7. Used for dealers and mechanic only
8. Cycle button for pulling up bobbin thread
9. Used for setting timing - use in manual mode
10. Shows machine running
11. Shows machine stopped
12. Used when threading needle. Disables buttons so machine won’t accidentally run.
Needle will move to up position.
13. Set needle position up or down when machine stops.
L Button
- Same as button on Left Handle - Needle up or down in S.R. mode
R Button
- Same as button on Right Handle - Start or Stop in S.R. mode
Home Button
-
Sets motor to home position - push home button after machine first starts up.
Also used if you use the Hand Wheel to move needle, will put the motor back in home position
S.R. Button
- Shows you are in Stitch Regulation mode. Push to go to manual mode.
5
7
- 10 -