RFID HIDDEN LOCK:
Add users (Mode 1 and 2)
To add users you need the programming card and the user cards you wish
to add.
1.
Place the programming card on the lock. Repeated tones will sound
for 7 seconds. Programming signal.
2.
Place the user card on the lock within 7 seconds until you hear a
confirmation signal. Confirmation signal.
3.
Continue adding users by repeating the above (Up to 200 users may
be added per lock).
Remove users (Mode 1 and 2)
To remove users you need the programming card and the user cards you
wish to remove.
1.
Place the programming card on the lock. Repeated tones will sound
for 7 seconds. Programming signal.
2.
Place the user card you want to remove on the lock within 7 seconds
until you hear an erase signal
3.
To check, wait for 5 seconds and then place the user card on the lock.
If everything is correct, an error signal will sound (4 short tones).
Error signal.
If you want to erase all users from the lock at the same time, see heading
Reset the lock to Mode 1
.
Operating instructions in Mode 1 and 2
To Unlock:
•
Present pre-programmed user card or tag on to the lock
To lock:
•
In Mode 1 you must place the card on the lock again.
•
In Mode 2, the lock automatically locks after 4 seconds. You only need
to close the storage for the lock to be locked.
Operating instructions in Mode 3, 4 and 5
To lock:
•
The lock is locked by placing any RFID-card (or tag) onto the lock.
To unlock:
•
To open again, the exact same RFID-card (or tag) has to be placed
onto the lock again. Once the lock has been opened again it is then
ready for a new user.
Note that no other card (or tag) can open the lock once it is occupied
(except for the service card which serves as a master key).
Batteries
Lock is powered by 1 lithium battery CR123A (3V, min 1400 mAh).
Providing battery life of 30,000 cycles
When the battery is low, a warning signal will sound when locking.
Warning signal, low battery:
If the batteries run out before the battery is changed, the lock will
automatically open and stay open.
Warranty does not cover batteries or damages caused by misuse.
Batteries estimated lifetime is about 2 to 4 years depending on use.
More info:
https://www.swedstyle.com/en/products/locks
FlexLock Invisible 2.0
When the battery is changed, the storage must not be closed
until the function of the battery is verified. If the battery is
missing or broken, you might not be able to open the lock
again. (Refers to locks in Mode 2.) Test the lock with the front
open!
!
CAPA– LOCKS
USER INSTRUCTION
Summary of Contents for CAPA
Page 2: ...DIGITAL CODE LOCK GETTING STARTED GUIDE Digilock Versa Mini CAPA LOCKS USER INSTRUCTION...
Page 3: ...DIGITAL CODE LOCK GETTING STARTED GUIDE Digilock Versa Mini CAPA LOCKS USER INSTRUCTION...
Page 6: ...RFID LOCK GETTING STARTED GUIDE Digilock Versa Mini CAPA LOCKS USER INSTRUCTION...
Page 7: ...RFID LOCK GETTING STARTED GUIDE Digilock Versa Mini CAPA LOCKS USER INSTRUCTION...