CAPA– LOCKS
USER INSTRUCTION
MANUAL CODE LOCK:
Factory default code is 0-0-0-0
Assign a User Code and operate:
To Lock:
1.
Make sure the knob is in the position.
2.
Close the door.
3.
Set any 4-digit code.
4.
Turn the knob to the position.
5.
Scramble the code.
To Unlock:
1.
Enter your 4-digit code.
2.
Turn the knob to the position.
3.
Open the door.
4.
Scramble the code.
Operate with the Manager Key
1.
Insert the Manager Key.
2.
Turn the knob to the symbol.
3.
Open the door.
Note: If opened in error, use the Manager Key to turn the lock to the
position. The original code will continue to operate the lock. If the
code is forgotten, follow the Reset Instructions to make the lock
available for another user.
Reset Instructions
1.
Insert the Manager key.
2.
Turn the knob to the position.
3.
Remove the Manager Key.
4.
Insert the Reset Tool.
5.
Push in the Reset Tool and simultaneously turn all dials until it
stops.
6.
The final code displayed is the current code.
7.
Turn the knob to the position.
More info:
https://www.digilock.com/support/mech/
Digilock Mech
Summary of Contents for CAPA
Page 2: ...DIGITAL CODE LOCK GETTING STARTED GUIDE Digilock Versa Mini CAPA LOCKS USER INSTRUCTION...
Page 3: ...DIGITAL CODE LOCK GETTING STARTED GUIDE Digilock Versa Mini CAPA LOCKS USER INSTRUCTION...
Page 6: ...RFID LOCK GETTING STARTED GUIDE Digilock Versa Mini CAPA LOCKS USER INSTRUCTION...
Page 7: ...RFID LOCK GETTING STARTED GUIDE Digilock Versa Mini CAPA LOCKS USER INSTRUCTION...