CODE SWITCH
1.
CODE SWITCH: Codes are set by pushing dip switches up or down. It is imperative that the
code used for both transmitter and receiver is exactly the same; otherwise remote controller will
not work. Please note the code switch will enable you to operate a second remote controller
independently. For example, if you have two ceiling fans with 2 remote control units, set 2
different codes for each set of transmitter/receivers. This means you can operate each ceiling fan
independently.
2.
Your remote control is ready for use after batteries, DC1.5V/AAA 2pcs, installation.
FUNCTIONS OF TRANSMITTER
: Turn off the ceiling fan.
: Turn on the fan at high speed
: Turn on the fan at medium speed
: Turn on the fan at low speed
: When fan turned on, press this key for that the ceiling fan will
turn off after 2 hours automatically.
: When fan turned on, press this key for that the ceiling fan will
turn off after 4 hours automatically.
: When fan turned on, press this key for that the ceiling fan will
turn off after 8 hours automatically.
: Press and release immediately to turn on or off the light
TRANSMITTER
IMPORTANT WARRANTY INFORMATION
MARTEC PTY LTD WARRANTS THIS PRODUCT FOR 1 YEAR FROM PURCHASE DATE WITH AN "IN HOME" WARRANTY. MARTEC
PTY LTD ONLY WARRANTS THE MARTEC PRODUCT AGAINST FAULTY WORKMANSHIP AND ARE SUBJECT TO THE TERMS AND
CONDITIONS AS SET OUT ON THE MARTEC WEBSITE:
WWW.MARTECAUSTRALIA.COM.AU
I
www
.
martecaustralia.com.au
I
02 8778 7500
I
MPREMS
