www.martecaustralia.com.au | 02 8778 7500 | [email protected]
Page 4
HOW TO INSTALL BLADES
The blade hole position is aligned with the turntable hole position. Tighten with the blade screw of the screw
bag. (See Fig.1)
Fig.3
Fig.2
Fig.1
HOW TO ASSEMBLE
Secure the hanger bracket to ceiling beam or a suitable piece of timber inserted between the ceiling beams.
Martec Pty Ltd recommends the bracket to be attached with two long screws as supplied within the package.
There is a ball seat rubber cover need to be pressed into the bracket.(See Fig.2)
Place circular shockproof gasket above the hanger bracket.Align the bracket and screw the hanger bracket to
the ceiling tightly.(See Fig.3)
Place fan into hanger bracket and align Ball Joint Slot with hanger bracket as illustrated. (See Fig.4)
After wiring is completed, attach the canopy to the hanger bracket by pushing upwards and twisting
anticlockwise. Locate screws in keyholes and tighten, ensuring canopy is not touching the ball joint. (See
Fig.5)
Fig.4
Fig.5