6
USING THE DEVICE
I.
SPEED SELECTION
Press speed mode button I to start operating.
Then use the speed controller to increase or decrease the speed gradually.
Choose speed mode, depending on the products. Start using low speed, gradually moving to higher.
CAUTION: speed controller operates with pressed button I only.
To use maximum speed, press speed mode button II.
II.
USING BLENDER
Set blender accessory.
Place the accessory in the cup with the product, hold the handle.
Connect the device to the mains, choose proper speed.
Move blender in the cup in a circular motion for proper grinding.
Don’t allow any liquid reaching device handle.
In case cutting blades are blocked, turn off device & unplug the appliance from the mains.
After use, turn off device by pressing on/off button, remove blender from the mains and disconnect the accessory.
III.
USING WHISK
Fix handle on the upper part of the whisk.
Place product inside of the cup.
Connect the device to the mains, choose desires power and speed.
After use, turn off device by pressing on/off button, remove blender from the mains and disconnect the whisk.
CLEANING AND MAINTENANCE
Before cleaning, always unplug the appliance.
Use wet cloth to clean the motor block. Do not immerse the appliance in water or other liquids.
Clean accessories in soapy water and dry.
Do not use chemical and abrasive cleaners for cleaning.
Recommended to clean the device right after operating to avoid coloring of plastic parts.
SPECIFICATION
Power supply Maximum power Net weight / Gross weight Package size (L х W х H) Producer:
COSMOS FAR VIEW INTERNATIONAL LIMITED
Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China
Made in China
230 V ~ 50 Hz
1200 W
0,7 / 0,8 kg
145 x 97 x 215 mm
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production. Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model
without notice. Please check when purchasing device.Current information about service centers is available on the website
