- 20 -
7.3 CODE ID
Enable/Disable CODE ID
If CODE ID is enabled, your pre-defined CODE ID for each symbology will be added to the front of
each barcode data.
Enable CODE ID
*Disable CODE ID
Default CODE ID
Scan Default CODE ID configuration barcode below will reset every CODE ID to default. You may
refer to
CODE ID Table
(Appendix A) for default CODE ID of each symbology.
Default CODE ID
Set CODE ID
You can define 1 character as CODE ID using each Set CODE ID configuration barcodes below.
First you need to convert the desired character into Hexadecimal value with the help of
ASCII Table
(see
Appendix B)
Example: Set CODE ID of Code 128 as ‘A’
1. Find the Hexadecimal equivalent of ‘A’ using
ASCII Table
(see Appendix B). You will get ‘41’.
2. Make sure Barcode Configurability is enabled (see Chapter 1.2.1)
3. Scan ‘Set CODE ID of Code 128’
4. Scan ‘4’ and ‘1’ respectively from
Numeric Barcodes
(see Appendix C)
5. Scan ‘Save’ (see Appendix D)
