Marson MT580W, User Manual

Page: 143 / 154

141
d. Program the Timeout between Decodes (Same Barcode)
Example: Set the timeout between decodes (same barcode) to 1000ms
1. Scan the Enter Setup barcode.
2. Scan the Timeout between Decodes (Same Barcode) barcode. (See the
“Timeout between
Decodes (Same
Barcode)”
section in Chapter 3)
3. Scan the numeric barcodes
“1”, “0”, “0” and “0”.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
e. Program the Threshold Value of Illumination Change
Example: Set the threshold value of illumination change to 4
1. Scan the Enter Setup barcode.
2. Scan the Threshold Value of Illumination Change barcode. (See the
“Sensitivity”
section in
Chapter 3)
3. Scan the numeric barcode
“4”.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)
f. Program the Timeout between Decodes
Example: Set the timeout between decodes to 500ms
1. Scan the Enter Setup barcode.
2. Scan the Timeout between Decodes barcode. (See the
“Timeout between Decodes”
section in
Chapter 3)
3. Scan the numeric barcodes
“5”,“0” and “0”.
4. Scan the Save barcode.
5. Scan the Exit Setup barcode. (If you still need to program other parameter/feature, skip this step.)