Using Condition
Indoor / Outdoor
Input Power
AC24V
Power Consumption
VS-H60-SHB
24VAC:22W
VS-H60-SHBD
24VAC:30W
VS-H60-SHBDW
24VAC:35W
Weather Resistant
VS-H60/VS-H60-S
Temperature: -15°~+50° / Humidity: 100%
VS-H60-SHB
Temperature: -35°~+55° / Humidity: 100%
VS-H60-SHBD
Temperature: -40°~+55° / Humidity: 100%
Thermostat
Heater: ON 4°C±3°C
Blower: ON 45°C±5°C
Dimension
External Size
Internal Size
VS-H60
173(W)x116(H)x428(D)m/m
132(W)x78.4(H)x383.8(D) m/m
VS-H60-S
184.6(W)x127.3(H)x460(D)m/m
132(W)x78.4(H)x383.8(D) m/m
VS-H60-SHB
184.6(W)x127.3(H)x460(D) m/m
132(W)x78.4(H)x294(D) m/m
VS-H60-SHBD
VS-H60-SHBDW
Weight
VS-H60
: 2.3kg,
VS-H60-S
: 3kg,
VS-6H0-SHB
/
VS-H60-SHBDW
: 3.6kg
Material
Aluminum, Glass, Plastic
IP grade
IP66
Accessory
1/4-20UNC Screws (3ea). Spring Washer (1ea). Flat Washer (1ea)
VS-H60 Specifi cations
VS-H60 Safety Instructions / Installation
VS-H60 Series Confi guration Options
Camera Installation
Important safety instructions
1. Safety check
- Safety checks should be performed upon completion of service or repairs to the
unit to ensure proper operating condition.
2. Installation
- Install in accordance with the manufacturer’s instructions and in accordance with
applicable local codes.
3. Attachments, changes or modifi cations
- Only use attachments/accessories specifi ed by the
manufacturer. Any change or modifi cation of the equipment, not expressly approved by Marshall,
could void the warranty or, in the case of an authorization agreement, authority to operate the
equipment.
· Use 5MM wrench, open the housing top part
· Remove the camera plate, Install the camera on the camera plate and screw up
· Check the lens and focus
· Close the housing top part and screw up tightly
* Camera Not Included
* Shown with optional Wiper
Available Options:
•
S - Sunshield
•
H - Heater
•
B - Blower
•
D - Defroster
•
W - Wiper
•
P - PoE+
•
VS-H60
Basic Housing
•
VS-H60-S
With Sunshield
•
VS-H60-SH
With Sunshield and Heater
•
VS-H60-SHB
With Sunshield Heater and Blower
•
VS-H60-SHBD
With Sunshield Heater, Blower and Defroster
•
VS-H60-SHBDW
With Sunshield Heater, Blower, Defroster and Wiper
•
VS-H60-HSBDWP
With Sunshield Heater, Blower, Defroster, Wiper and PoE+
2
3
Use 5MM wrench, open the housing top part.
Remove the camera plate, Install the camera on the camera plate and screw up.
Check the lens and focus.
Close the housing top part and screw up tightly.
Drawings
Important safety instructions
1.
Safety check -
Safety checks should be performed upon completion of service or
repairs to the unit to ensure proper operating condition.
2.
Installation -
Install in accordance with the manufacturer's instructions and in
accordance with applicable local codes.
3.
Attachments, changes or modifications -
Only use attachments/accessories specified
by the manufacturer. Any change or modification of the equipment, not expressly
approved by KEVIS, could void the warranty or, in the case of an authorization
agreement, authority to operate the equipment.
Camera Installation
Use 5MM wrench, open the housing top part.
Remove the camera plate, Install the camera on the camera plate and screw up.
Check the lens and focus.
Close the housing top part and screw up tightly.
Drawings
Important safety instructions
1.
Safety check -
Safety checks should be performed upon completion of service or
repairs to the unit to ensure proper operating condition.
2.
Installation -
Install in accordance with the manufacturer's instructions and in
accordance with applicable local codes.
3.
Attachments, changes or modifications -
Only use attachments/accessories specified
by the manufacturer. Any change or modification of the equipment, not expressly
approved by KEVIS, could void the warranty or, in the case of an authorization
agreement, authority to operate the equipment.
Camera Installation
Technical Drawings
VS-H60 Series Specs
