Marshall Electronics VS-7300, User Manual, Page: 25 / 47

4. Remote Configuration
User Manual VS-7300 – V1.0 Page 25 of 47 5/2016

MPEG-TS is the standard format for the transmission and storage of audio, video,
and data, and is used in broadcast systems such as DVB and ATSC. Transport
Stream is specified in MPEG-2 Part 1 Systems (formally known as ISO/IEC
standard 13818-1 or ITU-T Rec. H.222.0). Transport Stream specifies a container
format encapsulating packetized elementary streams with error correction and
stream synchronization features for maintaining transmission integrity when the
signal is degraded. Although MPEG-TS supports AAC as the audio algorithm, only
video is streamed when audio algorithm is set to G.711.

Destination IP: Set the IP Address of the Destination System which will receive MPEG-
TS stream.

Destination Port: Set the Port of the Destination System which will receive MPEG-TS
stream.
SNMP
SNMP (Simple Network Management Protocol) is compatible with both SNMPv1
and SNMPvec . Settings for using SNMP are as follows:

SNMP Listen Port (0, 161, 1025 - 65535)
This port is for connecting an external device as an SNMP client. SNMP is not
used when the value is 0.

SNMP Trap Destination IP
Set the SNMP Trap Destination IP.

SNMP Trap Destination Port (0, 162, 1025 - 65535)
Set the SNMP Trap Destination Port. SNMP is not used when the value is 0.
M
Simple Network Management Protocol (SNMP) is used by Network Management
Systems to communicate with network elements. SNMP lets TCP/IP-Based
Network Management clients use a TCP/IP-Based internetwork to exchange
information about the configuration and status of nodes. SNMP can also generate
trap messages used to report significant TCP/IP events asynchronously to
interested clients. For Example: a router could send a message if one of its
redundant power supplies fails or a printer could send an SNMP trap when it is out
of paper.